AEM 30-5500, Руководство пользователя

Страница: 20 / 57

20
Enabling logger adds the following special outputs:
·
Log Mem Total - The total logging memory in kilobytes
·
Log Mem Free - The amount of logging memory remaining in kilobytes
·
Log Mem Percent Free - The percentage of logging memory free.
·
Log Status - A string representing the current logging status:
The Log Status string has the following meaning:
·
Logging not Supported - This firmware does not support logging.
·
Logging stopped - The device is not currently logging.
·
Logging running - The device is currently logging.
·
Log looped - The log has looped.
·
Log memory space low - There is less than 5% of the log memory remaining.
·
Log memory full - The logging memory is full and logging has stopped.
·
Log initialising - The logger is currently processing the setup.
·
LOG SETUP ERROR - There is a problem with the logger setup.
·
LOG OVERRUN - The logger has been unable to write the log data to the memory. Either reduce the
number of logged channels or reduce the complexity of the display screen.
·
Log memory worn - There are a significant number of bad blocks in the flash memory. Logging will
continue to work but capacity will be reduced.
To download log files from an AEM CD-7L, connect the USB cable between the dash and your PC. Launch
AEMData analysis software and turn on the switched ignition power to the Dash. The message below will be
displayed when AEMData detects a connection to the dash.
Go to Logger | Download Log
If there are logs saved on the dash, a list similar to the one below will be presented. Select the files to
download. Choose whether to erase the files from the dash or not.