Read and understand these instructions BEFORE attempting to install this product. Failure to
follow installation instructions and not using the provided hardware may damage the intake
tube, throttle body and engine.
1. Preparing Vehicle
a. Make sure vehicle is parked on level surface.
b. Set parking brake.
c. If engine has run in the past two hours, let it cool down.
d. Disconnect negative battery terminal.
e. Do not discard stock components after removal of the factory system.
2. Removal of stock system
b. Unplug MAF sensor and loosen hose clamp at air
box inlet.
c. Release all clips and remove upper air box from
vehicle. Loosen the two screws securing the MAF
sensor and remove it from the air box.
d. Remove the air filter from the lower air box.
a. Stock air box system installed.
