AEI Security & Communications DG180-S, Инструкция по эксплуатации

Страница: 7 / 20

Please read this instruction manual carefully prior to installation Page 07
DG180-S - Wireless Video Sender System
STEP 3
Install the xSender™ Receiver
The xSender™ Receiver will pick up the signals being sent by your xSender™ Transmitter and out-
put them to a connected TV.
Connect the Power Supply Unit (PSU) to the sock-
et labelled ‘PSU’ on the DG180-S Receiver.
3.
Locate a vacant SCART socket on the back of your
receiving TV and insert the DigiSender® SCART
cable.
1.
Ensure that the A/V Channel switch on the back
of the DG180-S Receiver is set to 1.
2.
Connect the Power Supply Unit (PSU) to an avail-
able mains socket.
4.