AEI Security & Communications DG180-S, Инструкция по эксплуатации

Страница: 5 / 20

Please read this instruction manual carefully prior to installation Page 05
DG180-S - Wireless Video Sender System
STEP 2
Install the xSender™ Transmitter
Connect the IR Emitter to the socket labelled IR
on the back of the DG180-S Transmitter.
3.
Insert the DigiConnector™ into the SCART socket
labelled ‘TV’ or ‘OUT’ on your source equipment
(Satellite, Freeview, DVD, VCR, etc.) and plug the
SCART cable leading to your TV into the back of it.
1.
Ensure that the A/V Channel switch on the back
of the DG180-S Transmitter is set to 1.
2.
The DG180-S Transmitter will send the sound and video from a connected source (Satellite, Freeview,
DVD, VCR, etc.) to the DG180-S Receiver, located in another room in your home.
Position the IR emitter on or in front of your
source equipment (Satellite, Freeview, DVD, VCR,
etc.) with the LED facing toward the equipments
remote control pick up point.
4.