10
|
DANR THP
|
DANR THPC
Maintenance
Earseal Replacement
Remove the seal by grasping and pulling the
rear flap of the seal over the retention lip of
the earcup on each side.
Replace the earseal by stretching the rear
flap of the earseal over the retention lip of the
earcup on each side.
The earplugs should be cleaned periodically with warm, soapy water and/or non-alcohol
wipes to prevent buildup of dirt and to disinfect. (NOTE: Do NOT submerge or allow water to
enter the sound port in the tip of the canal.) Earseals, earcups, and headband may be wiped
down with a cloth dampened with water.
The earplugs, headset, and associated equipment should be stored in the protective
cases provided.
See the Troubleshooting
and Maintenance guide
for details on headset
maintenance.
See the DANR Earplug
Manual for required
DANR earplug service and
maintenance.
Replacement
Parts
Description
05-021001
DANR Earplug Set
05-021008
Replacement Waxguards with Applicator
05-999002
Aegisound® Ear Gel
05-999001
Replacement Earseal Kit
05-005001
DANR THP base headset with blank
module (battery not included)
05-005023
Battery Pack
05-012001
Two Gang Desktop Battery Charger
Boom and
Muzzle
Modules
Please contact Gentex Corporation
for information on currently available
configurations
Earplugs
Headset