Aegis Wireless Web Tablet, Руководство пользователя

Страница: 9 / 23

Aegis Wireless Web Tablet
4
Suspend/Resume Button
This is the recessed button along the left edge when facing the device. Quick push of the button toggles
between Suspend and Resume. Please note that the WWT operating system cannot enter into Suspend
mode again within 15 seconds after resuming. Also note that holding the button will not engage
Suspend/Resume – it will only temporarily dim the display.
Battery and Power Management
The Aegis Wireless Web Tablet is equipped with an internal Li-Ion battery pack that is capable of
supporting approximately 3 hours of continuous operation. The period between battery recharges can
be significantly lengthened by putting the device into Suspend mode whenever the device is not in use.
The Aegis Wireless Web Tablet may also be configured to automatically enter into power-saving
modes after user-definable periods of device idle – see
Start > Settings > Control Panel > Power
Properties .
A warning message will be generated during a low battery situation. If the Aegis WWT is not
connected to the charger within a few minutes, it will automatically go into Suspend mode. After the
web tablet enters Suspend mode due to low battery condition:
•
The Suspend/Resume button will not resume the machine unless the AC-DC adapter is used.
•
If the system is left on for an extended period of time the battery power will may drain entirely.
If after recharging the Web tablet will not start using the Suspend button you may have to reset
the system (see below).
Reset Button
The reset button is recessed in a small hole at the back of the Aegis Web Tablet. Use the stylus to
operate this button. Pushing the reset button briefly will generate a warm reset if the WWT locks-up.
The effect is to clear the volatile memory (RAM) without affecting device settings. This function is
applicable to situations that include lockup of applications and preparation of device for software
updates. If a warm reset doesn’t restart the WWT, try pressing and holding the reset button for four
seconds and then simultaneously pressing the Suspend button for one second. This “cold” reset will set
the unit into default mode and your settings (including screen calibration) will have to be manually
restored.
Compact Flash Memory
The Web Tablet has a slot on the upper right edge that will accept Compact Flash memory cards.
These cards are the same ones used in many digital cameras and can expand the web tablet’s memory
(by up to 64Mb). Many Compact Flash cards from cameras can be inserted directly into the Aegis
WWT to display family photographs, through the built-in document viewer program.
Note: The label on the Compact Flash Card should face the back of the Web Tablet. If the card doesn’t
slide in easily, it may be backwards.