Aegis Wireless Web Tablet, Руководство пользователя

Страница: 17 / 23

Aegis Wireless Web Tablet
12
Software Synchronization (optional)
The Aegis Wireless Web Tablet is amenable to software installation, development and synchronization
through connection to a host PC where the primary software resides. This is enabled by a USB cable-
based connection between the host PC and the USB Slave port on the cradle of the Aegis Wireless Web
Tablet. The following steps should be taken only by people familiar with PC applications:
i) Install ActiveSync 3.1 or 3.5 on host PC.
http://www.microsoft.com/mobile/pocketpc/downloads/activesync35.asp
ii) Install USB driver for Aegis Wireless Web Tablet on host PC (obtain as required from your
device provider).
iii) Securely seat the Aegis Wireless Web Tablet on the Cradle.
iv) Connect USB cable between Aegis Wireless Web Tablet’s Cradle and host PC.
v) Enable the USB connection by engaging the appropriate (#6, per Buttons Function Table)
button on the Aegis Wireless Web Tablet. Verify that the Cradle Connection icon is active.
vi) Use the ActiveSync application to select and initiate the files/software transfer.
NOTE
: Suspend/Resume or removing Aegis Wireless Web Tablet from cradle turns off the connection
between Aegis Wireless Web Tablet and host PC. The Cradle Enable button (#6) needs to be used
again to re-establish the connection. Always refer to the Cradle Connection icon on the Windows CE
Taskbar for verification.
Device Registry (optional)
The device registry characterizes the device, defining supported device components and peripherals,
applications and content. Many registry elements are being changed or updated during a typical session
of operation.
At key events such as low battery level or upon adding favorites in the browser, registry contents will
be saved from volatile memory to flash ROM automatically, ensuring persistence of the registry
settings, even after total power loss. A typical save process will take about 4 seconds. The Registries
Saving utility in Windows CE Control Panel can be used to manually save registry contents to ROM as
well.
Right Mouse Function
Right-mouse function has been added to the Windows CE Taskbar. Select the mouse icon on Taskbar
to enter Right-mouse mode. The system will automatically switch back to Left-mouse mode after
single use in Right-mouse mode or by selecting the mouse icon again on the Taskbar.