QuickSwitch™ – Instruction Manual
Figure 3.2-2 Switch Operation Diagram
.
4.
OPERATING INSTRUCTIONS
4.1.
Components Available
The
QuickSwitch™
is available with a range of interchangeable IDS access plugs, contained in
a carry bag, or purchased separately.
As each access plug can be purchased separately, refer to the list in section 2.1 for details on the
types of switch & adaptor leads available.
This instruction manual is supplied with the
QuickSwitch™
.
The
QuickSwitch™
with the appropriate plug can be used with any test, measure or fault
location instrument that is fitted with suitably protected 4mm, male banana plugs that will not
exceed the specifications of this lead.
To Suit IDS Modules
• Krone
• Madison
• Siemens 71
• Siemens 2000
• Siemens 5000
• 3M (Quante)
• Marconi
IEC61010
Protected Female
Banana Sockets
(Jumper Side & Cable Side -
Switchable)
Top
Pair of Access Plug
(Cable)
A Leg
B Leg
B Leg
A Leg
Bottom
Pair of Access Plug
(Jumper)
Switch
(3 Position DP)
IEC61010
Protected Female
Banana Sockets
(Jumper Side, Permanent)
To Suit IDS Modules
• Krone
• Madison
• Siemens 71
• Siemens 2000
• Siemens 5000
• 3M (Quante)
• Marconi
IEC61010
Protected Female
Banana Sockets
(Jumper Side & Cable Side -
Switchable)
Top
Pair of Access Plug
(Cable)
A Leg
B Leg
B Leg
A Leg
Bottom
Pair of Access Plug
(Jumper)
Switch
(3 Position DP)
IEC61010
Protected Female
Banana Sockets
(Jumper Side, Permanent)
August 2009
Page 8 of 17
CZ02408-02
