QuickSwitch™ – Instruction Manual
7.
CARE AND MAINTENANCE
7.1.
Warranty
The
QuickSwitch™ & Adaptor Leads
are warranted against defects in materials and
workmanship for a period of 12 months from the date of purchase. If AEGIS PTY LTD
receives notice of such defects within the warranty period, AEGIS shall, at its discretion, either
repair or replace the defective unit. For purposes of warranty repair or replacement, the user is
required to return the defective item together with proof of purchase, to AEGIS at the address
given in section 7.2 below. The warranty does not apply for defects or damage arising from
misuse by the user.
7.2.
Maintenance and Servicing
The
QuickSwitch™ & Adaptor Leads
contain no user-serviceable parts, and damaged or
failed instruments should be returned to the manufacturer for repair. Such units should be
suitably packaged and sent by pre-paid parcel post or courier to the address below:
Aegis Pty Ltd.
Phone 1300 723 447
200 Rooks Rd, Vermont Vic. 3133
Australia
Tel : +61-3- 8872 6666
Email:
Fax: +61-3- 8872 6678
Website:
www.aegis.net.au
The sender’s name and return address must be supplied, together with a description of the fault.
If different from the return address, an invoicing address should also be given.
7.3.
Cleaning
Do not immerse the
QuickSwitch™ or Adaptor Lead
in water.
To clean, simply wipe over with a damp cloth.
Do not use any harsh detergents or solvents on the
QuickSwitch™ or Adaptor Lead.
7.4.
Calibration
Not required.
August 2009
Page 15 of 17
CZ02408-02
