Aegis DataCell D, Инструкция по эксплуатации

Страница: 7 / 12

Page 7 of 12
CZ21554-01
3.3. Communicating with a DataCell D
To communicate with the DataCell D you must use the Connect software suite. Configuration changes
may only be made locally via the Infrared cable. All information and instructions regarding the
configuration, set up and data collection of the DataCell D can be found in the Connect User Guide
which is available online at www.datacell.co.
3.4. LED indications
LED’s are provided to give the user an indication of what activity the DataCell is undertaking at any given
time. These LED’s are visible via the infrared communications port and have various activity states as
described below:-
Both LED’s OFF. Unit in low power or sleep mode.
Green OFF, Orange ON. Logging disabled, Unit in High power mode.
Green On, Orange ON. Logging enabled, Unit in High power mode.
4. CARE AND MAINTENANCE
4.1. Warranty
The DataCell D is warranted against defects in materials and workmanship for a period of 12 months
from the date of purchase as per the standard Aegis terms and conditions of Warranty. For purposes of
warranty repair or replacement, the user is required to return the defective item together with proof of
purchase to AEGIS at the address given in this section below. Aegis is not responsible for any incidental
or consequential damages resulting from the breach of any express or implied warranty including
damage to property and to the extent permitted by law damages for personal injury. Aegis does not
assume liability or responsibility for any loss or damage resulting from the use of this device.
4.2. Maintenance and Servicing
The DataCell D contains no user-serviceable parts and any damaged or failed instruments should be
returned to the manufacturer for repair. Such units should be cleaned, suitably packaged, and
transported in accordance with local regulations to:
Aegis Pty Ltd.
200 Rooks Rd, Vermont, Victoria, Australia, 3133
The sender’s name and return address must be supplied, together with a description of the fault.
If different from the return address, an invoicing address should also be given.
4.3. Cleaning
Warning: Potential electrostatic charging hazard.
Only wipe product with a damp cloth.
Do not wipe with solvent.