AEGIS
CZ20252
User Guide
8
www.aegis.net.au
2.
Press RCL button
3.
Press the key for the memory location (keys 0 through 9, *and #)
Direct Dial
The M1 key provides direct dialling of one stored number. The number
for the M1 key can be stored using the same process as for storing
speed dial numbers, just select the M1 key to store the number to.
When connected and dial tone is available, the CZ20252 will dial the
number when the M1 key is pressed.
Last Number Redial
The LNR key redials the number most recently dialled. If you use LNR
but the line is busy, switch the Talk mode to Vdc position to hang up and
then switch back to Talk mode again, then press the LNR key to redial
once again.
Pause
There are some cases where it may be necessary to insert a pause
between digits of a stored number, such as when accessing a trunk
through a PABX that requires a 9 to get an external line. To store a
number with a pause, simply press the PSE button at the point where
the pause is required. For example, 9’PSE’123456781212 would be
used when 9 was required for an outside line and you wanted to store
the number 12345678. The PSE button inserts a 4 second pause.
Mute function
The mute button in Talk mode will quieten the sound, which will remove
environment background noise and assist the receiver to clearly hear
the conversation.
Polarity Identification
The polarity LEDs automatically illuminate to show line polarity. For
example, the right red POL+ LED will light when you connect the red
test lead to ring (positive) side of the line and the black test lead is
connected to the tip (negative) side of the line. The left red POL- LED
will light if the test leads are reversed.
