7.7 Finish In
This option allows choosing
the time at which a
programme should
terminate. Once activated
the machine waits for the
right moment to begin the
drying process.
Finish In time is the sum of stand by time
and drying time.
To set the Finish In option:
1. Set the drying programme and
options.
2. Touch Finish In button.
3. Touch the + or - button until the
display shows the desired time within
the programme should end (e.g.
if the programme has to finish
within 12 hours.)
3s
3s
4. Touch the Start/Pause button. The
drum starts rotating to perform the
ProSense estimation, if foreseen in
the selected programme.
5. The appliance starts the countdown
to the end of the programme and the
programme will start at the right
moment for ending.
7.8 Favourite programmes
These selector positions are available
after the appliance have been connected
to Wi-Fi.
The favourite programmes can be set
and saved via App only choosing from
the available ones which are divided into
the three categories indicated on the
control panel.
Once the favourite programmes have
been set, you can select one of them via
App or by turning the programme dial to
relevant position: the relevant led comes
on and the information on the display are
updated accordingly.
The favourite programmes
can be cancelled through the
related App command or
pressing the Factory Default
key combination.
7.9 SyncDry function
This feature lets your tumble dryer to
automatically set the most appropriate
programme that matches the last
washing program recently executed. All
you need to do is start the drying
programme once your tumble dryer is
loaded. No other programme settings or
options are required on the tumble dryer.
Once the washing programme has come
to an end, the washing machine transfers
the programme data via the home router
Wi-Fi to the AEG Cloud, as well as to
your tumble dryer.
In order to use the SyncDry
function, the AEG tumble
dryer and washing machine
must be connected to the
same home network and
paired with the My AEG
Care application.
To activate the function:
1. Once the wash cycle has come to an
end, place the clean laundry in the
tumble dryer.
2. Touch SyncDry button.
3. All display symbols will stay lighted
off except Wi-Fi icon and ProSense
bars that run an animation for a few
seconds as the appliance is
retrieving data from the cloud.
4. Display will update itself
automatically with the suggested
programme. After 10 seconds, if data
retrieving is unsuccessful, the button
LED is switched off and the machine
ENGLISH
19