AEG TR7080TW, Руководство пользователя

Страница: 20 / 52

Problem
1)
Possible cause Remedy
Unsatisfactory
drying result.
Incorrect program selection.
Select a suitable program.
2)
The filter is clogged.
Clean the filter.
3)
Dryness (Trockengrad) option
was set to iron dry (Bügel-
trocken).
4)
Change Dryness (Trocken-
grad) option to higher level.
The load was too large. Do not exceed the maximum load
size.
The airflow slots are clogged. Clean the airflow slots at the bot-
tom of the appliance.
Dirt on the humidity sensor in the
drum. Clean the front surface of the
drum.
Dryness level not set to desired
level.
Adjust the dryness level.
5)
The condenser is clogged.
Clean the condenser.
3)
The loading
door does not
close
The filter is not locked into posi-
tion. Put the filter in the correct posi-
tion.
Laundry is trapped between the
door and the seal. Remove trapped items and close
the door.
Not possible to
change the pro-
gram or option. After cycle start it is not possible to
change the program or option. Turn the tumble dryer off and on.
Change the program or option as
required.
Not possible to
select an option.
Acoustic signal
is emitted. The option you tried to select is
not available for the selected pro-
gram. Turn the tumble dryer off and on.
Change the program or option as
required.
No drum light
Defective drum lamp. Contact the service centre to re-
place the drum lamp.
Unexpected du-
ration time on
the display. The drying duration is calculated
according to load size and damp-
ness. This is automated — the appliance
is working correctly.
Program inac-
tive.
The water container is full. Drain the water container, push
the
Start/Pause button.
3)
www.aeg.com 20