Problem
Possible cause
Solution
The door is left open.
Close the door. Refer to "Door
open alarm"
The temperature in the ap-
pliance is too high.
Contact a qualified electrician
or contact the nearest Author-
ised Service Centre.
A
or
symbol is shown
instead of numbers on the
Temperature Display.
Temperature sensor prob-
lem.
Contact the nearest Author-
ised Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
The lamp does not work.
The lamp is in stand-by.
Close and open the door.
The lamp is defective.
Contact the nearest Author-
ised Service Centre.
The compressor operates
continually.
Temperature is set incor-
rectly.
Refer to "Operation".
Many food products were
put in at the same time.
Wait some hours and then
check the temperature again.
The room temperature is
too high.
Refer to climate class chart on
the rating plate.
Food products placed in
the appliance were too
warm.
Allow food products to cool to
room temperature before stor-
ing.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The "FROSTMATIC" or
"COOLMATIC" is switch-
ed on.
Refer to "FROSTMATIC func-
tion" or "COOLMATIC func-
tion".
The water drainage plug is
not correctly positioned.
Position the water drainage
plug in the correct way.
Food products are not
wrapped properly.
Wrap the food products bet-
ter.
Temperature is set incor-
rectly.
Refer to "Operation" .
The compressor does not
start immediately after
pressing the "FROSTMAT-
IC" or "COOLMATIC", or af-
ter changing the tempera-
ture.
This is normal, no error has
occurred.
The compressor starts after a
period of time.
www.aeg.com
14
Содержание SCE81831FS
Страница 19: ...product to your local recycling facility or contact your municipal office ENGLISH 19 ...
Страница 39: ...Portare il prodotto al punto di riciclaggio più vicino o contattare il comune di residenza ITALIANO 39 ...
Страница 59: ...ESPAÑOL 59 ...
Страница 60: ...www aeg com shop 222375209 A 102018 ...