Problem
Possible cause
Solution
The lamp does not work.
The lamp is in stand-by.
Close and open the door.
The lamp is defective.
Refer to "Replacing the lamp".
If your appliance is still not working properly after making the above checks, contact the
After Sales Centre.
Replacing the lamp
1. Disconnect the appliance.
2. Push the movable part to unhook the
lamp cover (1).
3. Remove the lamp cover (2).
4. Replace the lamp with one of the same
power and specifically designed for do
-
mestic appliances only.
5. Install the lamp cover.
6. Connect the appliance.
7. Open the door. Make sure that the lamp comes on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.
TECHNICAL DATA
S60300KG
S60340KG1
Dimension
Height
1540 mm
1750 mm
Width
595 mm
595 mm
Depth
658 mm
658 mm
Rising Time
20 h
20 h
Voltage
230 V
230 V
Frequency
50 Hz
50 Hz
The technical information are situated in the rating plate on the internal left side of the
appliance and in the energy label.
INSTALLATION
WARNING!
Read the "Safety Information" carefully for your safety and correct operation of the appli
-
ance before installing the appliance.
1
2
30
Technical data
Содержание S40340KG18
Страница 72: ...www aeg com shop 210621705 A 522010 ...