AEG Protect NAS, Информация по эксплуатации

Страница: 77 / 84

77
EN
Inserting the new battery system
Follow the steps described above in reverse order.
• For safety and efficiency reasons, only use battery replacement kits
from AEG PS.
• Assemble the plug connection so that it is secure .
Disposal of used batteries and accumulators (applicable within the
European Union and other European countries with separate collection
systems for these products).
This symbol on the accumulator or the packaging indicates that these
products are not to be handled in the same way as normal household
garbage. An additional "Pb" (lead) chemical symbol underneath the
crossed-out trashcan means that the accumulator has a lead content of
more than 0.4%.
By correctly disposing of these accumulators, you are protecting the
environment and the health of your fellow man. Incorrectly disposing of
these accumulators poses environmental and health hazards. Recycling
materials helps to reduce the consumption of raw materials.
In the case of products that require constant connection to the installed
battery to protect against data loss, the battery should only be replaced
by qualified service personnel.
To ensure that the battery is correctly disposed of, take the product to an
accumulator recycling collection point for disposal purposes.
You can obtain additional information about recycling accumulators from
your local authority, local waste management companies, or the company
that sold you the product.
Disposal information: Give only discharged batteries to the dealer or local
authorities for disposal.
D - Pull the battery system by
the plastic casing toward
you and replace the
battery system with
a replacement kit.