TROUBLESHOOTING
Symptom
Possible reasons
Solutions
Lid fails to lock
The sealing ring is not properly
Reinstall the sealing ring
installed
The float valve is seized by the push
Push the rod with hands
rod
Cannot open the lid
The float valve is still up
Press the float valve down
after air exhaust
Air escapes from the No sealing ring was installed
Install the sealing ring
rim of the lid
Food residue on the sealing ring
Clean the sealing ring
Sealing ring worn out
Replace the sealing ring
Lid not locked properly
Rotate the lid fully
Air escapes from the Food stuck on the sealing ring of
Clean the float valve
float valve
the float valve
sealing ring
The sealing ring on the float valve
Replace the float valve
worn out
sealing ring
The float will not rise
The pressure limit valve is not
Place the device to
placed properly
Pressure •
Not enough food and water
Check recipe for quantity
Air escaping from the rim of the
Call our Customer Helpline
lid and the pressure limit valve
0800 222 825 toll free in SA
Defaults to “Keep
After browning or sauté, temperature
Switch off pressure cooker
Warm” instead of
too high for pressure cooking
and wait approximately 1
1
/
2
“Pressure” function
minutes before selecting
High or Low Pressure
Continuous beep
After browning or sauté, temperature
Switch off pressure cooker
sound after setting
too high for pressure cooking
and wait approximately 1
1
/
2
timer and “Pressure”
minutes before selecting
function
High or Low Pressure
8