manualshive.com logo in svg

AEG OKO-LAVAMAT 88830 update, Информация пользователя

Поделиться
Скачать
AEG OKO-LAVAMAT 88830 update Скачать руководство пользователя страница 34

Operating Instructions

34

The washing machine 
vibrates during opera-
tion or it is on an une-
ven surface.

The transport packaging has 
not been removed.

Remove transport packaging 
according to the installation 
and connection instructions.

The height-adjustable screw 
feet are not correctly set.

Adjust the feet according to 
the installation and connec-
tion instructions.

There is not much washing in 
the drum (e.g. only one 
dressing gown).

This does not impair the 
function.

The water could not be com-
pletely pumped off before 
spinning because
The drainage hose is bent or
The solution pump is 
blocked.

Check the laying of the 
drainage hose and eliminate 
the bend if necessary, or 
clean the solution pump and, 
if required, remove foreign 
bodies from the pump hous-
ing.

The washing solution 
of the main wash 
froths up a lot.

Too much detergent was 
probably used

Meter the detergent exactly 
in accordance with the man-
ufacturer's information.

Water is flowing out 
from beneath the 
washing machine.

The screw connection on the 
intake hose is leaky.

Tighten the intake hose 
screw connection.

The drainage hose is leaky.

Check the drainage hose and 
replace it if necessary.

The washing solution pump 
cover is not correctly closed.

Close cover correctly.

Washing in caught in the fill-
ing door.

Abort the program and re-
move the washing through 
the door. Restart the pro-
gram.

The emergency emptying 
hose is not correctly closed 
or leaks.

Close the emergency empty-
ing hose correctly (see the 
section "Carry out emer-
gency emptying“). Inform 
Customer Service if the 
emergency emptying hose 
leaks.

Problem

Possible Cause

Remedy

Содержание OKO-LAVAMAT 88830 update





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды