manualshive.com logo in svg

AEG OKO-LAVAMAT 88830 update, Информация пользователя

Поделиться
Скачать
AEG OKO-LAVAMAT 88830 update Скачать руководство пользователя страница 12

Operating Instructions

12

Additional program buttons

The additional program buttons are for adapting 
the washing program to the dirtiness of the was-
hing. Additional programs are not required for was-
hing which is not excessively dirty. 
Various functions can be combined with each other, 
depending on the program.

k

 (PRE WASH)

Cold pre wash before the main washing cycle which 
follows on automatically. with intermediate spin at 

t

(COTTONS/LINEN), without intermediate spin-

ning in the case of 

}

 (EASY CARES) and 

Ã

 (DELICATES).

q

 (SOAKING)

Approx. 1 hour at 30 °C or 40 °C, depending on the set program. Can be 
extended with the button 

b

 (DELAY TIMER) by max. 19 hours. This is 

followed by the main washing cycle.

]

 (QUICK WASH)

Shortened washing cycle for slightly dirty washing.

ä

 (STAIN)

For treating very dirty washing or stained washing. (In-wash stain 
treatment is added during the program on a time-optimized basis)

3 

With the setting 

s

 (WOOLLENS)/

P

 (HAND WASH) it is not possible to 

select the additional programs (any buttons pressed have no effect).

Содержание OKO-LAVAMAT 88830 update





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды