32
Troubleshooting
3
The whistling noise when spinning may be different to
your prevous washing machine which is due to the
modern drive system.
Certain problems etc.
If you call out an engineer and the fault is listed here, a charge is levied
even if the appliance is in guarantee.
If the error code
(1
or
(2
is displayed, check the troubleshooting
guide below before calling an engineer.
Display
(1
: see "No water flows in".
Display
(2
: see "Washing has not been spun sufficiently, ...“ in the fault
finding table below.
After eliminating the error, press the START/PAUSE button. If the error
code is displayed again, please contact your local AEG Service Force
Centre.
Fault
Possible cause
Remedy
Washing machine does
not work.
The mains plug is not
connected.
Plug in the mains plug.
The fuse of the household
electrical system is faulty.
Replace the fuse.
The door is not correctly
closed.
Close the door; you must
hear a click as it locks.
START/PAUSE button not
pressed for long enough.
Press the START/PAUSE
button until the program
starts.
No water flows in.
Error code
(1
appears.
The water tap is closed.
Open the water tap.
The inlet hose is blocked.
Unscrew the hose from the
tap, remove the filter and
clean it under flowing water.
