30
Installation
•
Stick on the damp protection film as described in
the instructions on the rear side of the film (shorten
where necessary).
•
Attach the side rails to the side panels of the furni−
ture as described in the separate assembly instruc−
tions.
•
Place the appliance in front of the high cupboard,
and run the cable and hoses through the high cup−
board’s bay so that they are neither kinked or squas−
hed.
•
Align the dishwasher in the centre of the bay and
flush with the side panels, and where necessary, ad−
just to be flush at the front surface using shims.
•
Carefully open the door of the appliance without
changing the settings of the appliance.
•
Using the pre−drilled holes, screw the appliance to
the side panels of the furniture on both sides in the
upper inner area (see Detail A).
•
Before screwing the appliance diagonally through
the base plate using two additional screws (always
pre−drill), it is advisable to protect the appliance
door from damage using suitable materials (e.g. the
cardboard packaging). In order to tighten these
screws, the door must be opened by approx. 45 de−
grees (see Detail B).
Technical Data
Dimensions
Height
75.9 cm
Depth
57.0 cm
Width
54.6 cm
Capacity
12 place settings
Electrical connection
230−240V – 50Hz
Motor rating during wash
140 W
Power of heating element
2000 W
Overall power
2150 W
Water supply pressure
Minimum 1bar
Maximum 10 bar
153 0409 25 / 09.99
AEG
Detail A
Detail B