AEG LWX9A9613C, Руководство пользователя

Страница: 42 / 68

ProSense estimation starts. During
the program, the display will keep
you informed about each phase.
15.4 At the end of the drying
program
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• The display tells that the cycle is
finished and shows 0h00min .
• The indicator of button Start/Pause
goes off. The door unlocks and the
indicator
goes off.
• Press the button On/Off for some
seconds to deactivate the appliance.
After some minutes from
the end of the program,
the energy saving
function deactivates the
appliance automatically.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
The message Clean the
primary air filter appears
on the display to remind you
to clean the air filter (refer to
'Cleaning the air filters' in
'Care and cleaning' chapter).
16. DAILY USE - DRYING ONLY
WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
16.1 Preparation to drying
1. Press the On/Off button for some
seconds to activate the appliance.
With a drying-only program
the display does not show
the laundry weight and the
ProSense estimation is
deactivated.
2. Load the laundry one item at a time.
3. Turn the program dial to the program
suitable for the items to dry.
4. Tap on the Mode button twice to
exclude washing and perform drying
only. Only the Dry indicator is on.
The indicators and Cupb. appear
on the display. The display also
shows the maximum recommended
load.
Cottons
57min
More
Cupp.
Dry
5. Tap on Cupb. to enter the
Dryness Level menu.
When drying a big load of
laundry, to have good drying
performances, make sure
that the laundry itself is not
rolled up and that is
uniformly distributed in the
drum.
www.aeg.com 42