AEG LWX8C1612S, Руководство пользователя

Страница: 23 / 48

• After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.2
Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the programme is
completed, touch the Delay Start and
the Quick Wash buttons simultaneously
for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9.3 Permanent Extra Rinse
With this option you can permanently
have one or two extra rinses when you
set a new programme.
• Simultaneously touch the Temp.
button and the Spin button once to
add one extra rinse. appears on
the display.
• Simultaneously touch the Temp.
button and the Spin button twice to
add two extra rinses. appears on
the display.
• Simultaneously touch the Temp.
button and the Spin button three
times to remove extra rinses. The
display only shows
.
10.
DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme BEFORE
you put the laundry in the
drum.
10.2 Before activating the
appliance
1. Make sure that the mains plug is
connected to the mains socket.
2. Make sure that the water tap is open.
10.3
Activating the appliance
and setting a programme
1. Press button On/Off for a few
seconds to activate the appliance.
The programme dial is automatically set
on cotton programme and only the Wash
indicator is on.
The indicator of Start/Pause button
flashes.
2. Turn the programme knob to the
necessary programme.
The programme indicator comes on.
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the
programme duration.
3. If it is necessary, touch the Temp.
button and the Spin button to
change the water temperature and
the spin speed.
ENGLISH 23