If these operating instructions do not offer sufficient advice to elimi-
nate a specific fault, please contact our customer service.
Problem
Possible cause
Remedy
The drying cycle
exceptionally takes a
long time
Vented air transport disrupted
Straighten N- air venting hose and/or
clean air venting ducts
Lint filter blocked
Clean lint filter
The loading door
cannot be closed
Lint filter not installed and/or filter
lid not locked in position
Install lint filter and/or lock filter lid
in position
The drier ends the
drying cycle automa-
tically: “END” indica-
tor is illuminated
shortly after pro-
gramme start
Too little or too dry laundry loaded
for selected programme
Select time programme or higher
drying level (for instance EXTRA DRY
instead of STORE DRY)
The drying cycle
exceptionally takes a
long time. 4,5 hours
after starting the
drying cycle: “END”
indicator is illumi-
nated - drying cycle
is aborted - pro-
gramme run indica-
tor flashes
“LOW TEMP.”- button depressed and
filling quantity too large
Check programme selection: only use
“LOW TEMP.” -button for laundry
quantities up to 3 kg. Clean lint filter.
Filling quantity too large
Reduce filling quantity
Laundry too wet
Pre-dry laundry more thorougly
53
Something not working?
125983230.qxp 2007-05-11 09:57 Page 53