AEG LAVAMAT 82470 BI, Руководство пользователя, Страница: 17 / 72

SETTING THE DELAY START
(BUTTON 9)
Before you start the programme , if you
wish to delay the start, press the button 9
repeatedly, to set the desired delay.
The symbol
appears on the display.
The wash programme can be delayed
from 30 min. - 60 min. - 90 min., 2 hours
and then by 1 hour up to a maximum of
20 hours.
The set delay time value appears on the
display for about 3 seconds, then the du-
ration of the programme appears again.
Set this option after you have set the pro-
gramme and before you press the button
8 .
You can modify or cancel the delay time
at any moment, before you press the but-
ton
8 .
The door will be locked throughout the
delay time. If you wish to add laundry in
the appliance during the delay time, press
the button
8 to set the machine to pause.
When the symbol disappears , the
door can be opened. Add the laundry,
close the door and press the button
8
again.
Setting the delayed start.
• Set the programme and the required
options.
• Set the delay start.
• Press button
8 : the appliance starts its
hourly countdown. The programme
starts after the selected delay has ex-
pired.
Cancelling the delayed start
• Press the button 8 to set the appliance
to PAUSE;
• Press button
9 until the symbol ’ is
displayed;
• Press the button 8 again to start the
programme.
The set delay can be changed on-
ly after you have set the washing
programme again.
The Delay Start cannot be set with Drain
programme.
ALTERING AN OPTION OR A
RUNNING PROGRAMME
It is possible to change some options be-
fore the programme carries it out. Before
you make any change, you must press the
button
8 to pause the appliance.
Changing a running programme is possi-
ble
only by resetting it .
Turn the programme dial to and then
to the new programme position.
Press the
8 button again to start the new
programme. The washing water in the tub
will not emptied out.
INTERRUPTING A
PROGRAMME
Press the button 8 to interrupt a pro-
gramme which is running, the corre-
sponding light starts blinking. Press the
button again to restart the programme.
CANCELLING A PROGRAMME
Turn the selector dial to to cancel a
programme which is running. Now you
can select a new programme.
OPENING THE DOOR AFTER
THE PROGRAMME HAS
STARTED
First press the button 8 to set the appli-
ance to pause by .
• If the symbol
disappears, the
door can be opened;
• If the symbol
doesn’t go off, it
means that the appliance is already
heating or that the water level is too
high. In this case the door cannot be
opened;
• If you cannot open the door but you
need to open it, you have to switch the
appliance off by turning the selector di-
al to
/ Off . After a few minutes the
door can be opened (pay attention to
the water level and temperature!) ;
After closing the door, it is necessary to
set the programme again and to press the
button
8 .
AT THE END OF THE
PROGRAMME
The appliance stops automatically, the
light of button
8 goes off. A blinking
appears on the display and the acoustic
ENGLISH
17