31
Water inlet
A 1.35m long pressure hose is supplied with the appliance.
If a longer inlet hose is required, only hoses from the manufacturer are
to be used. Service Force stocks hose kits of different lengths.
3
Sealing rings are either inserted in the plastic nuts of the threaded hose
fitting or are included as spare parts. Do not use any other sealing
rings.
Important!
All threaded hose fit-
tings must only be tightened by
hand.
1.
Connect the hose with the right-an-
gle connector to the machine.
Important!
Do not position the inlet
hose vertically downwards. Position
it to the right or the left as shown in
the illustration.
2.
Connect the hose with the straight
connector to a water tap with an R
¾ (inch) screw thread.
3.
Slowly turn on the tap and check
that all connections are watertight.