AEG LAVAMAT 69480FL, Руководство пользователя

Страница: 14 / 28

3.
B
4.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash option.
• Do not set the delay start (or Finish in option).
10.5
Activating the appliance
Press and hold for a couple of seconds
the On/Off button to activate or
deactivate the appliance.
A tune sounds when the appliance is
activated.
The display shows the word On.
10.6 Setting a programme
1. Touch the programme button
Programmes and set the
programme:
• The indicator of the button
Start/
Pause
flashes.
• The display shows the
programme duration.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an
option, the indicator of the set
option comes on.
If you set something
incorrect, the display shows
the message
.
10.7 Starting a programme
without the Finish In option
Touch the button
Start/Pause
.
• The indicator of the button Start/
Pause stops to flash and stays on.
• The programme starts, the door
locks, the indicator is on.
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
10.8 Starting a programme
with the Finish In option
1. Touch the button Finish In again and
again to choose the number of hours
in which you want the washing cycle
to be finished.
The display shows the number of hours
you set (e.g.
) and the indicator above
the button Finish In is on to show that his
option is active.
2. Touch the button Start/Pause :
www.aeg.com 14