If the delay start option has been selected
, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to modify or cancel the
delay time.
• Load other laundry:
press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Modify or cancel the delay time:
press the START/PAUSE button.
Press the DELAY START button
until the time required appears
on the display, or
0
h, if you wish to cancel it. Press the START/
PAUSE button again.
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the programme
come on. After the machine has started, only the running
phase pilot light stays on.
Display
The time to the end of the programme decreases minute by minute and
appears on the display.
At the end of the programme
The machine stops automatically. A zero appears on the display. An
acoustic signal is clearly audible. The light
(END) comes on in the
programme progress display.
If the
(RINSE HOLD) option has been selected, the water must be
emptied out before opening the door either
- by pressing the START/PAUSE button (the laundry will be spun at the
speed corresponding to the selected type of fabrics. The spin speed
can be reduced by means of the SPIN SPEED button)
- or by selecting the SPIN SPEED and depressing the START/PAUSE
button
- or by turning the selector dial to
O
and then to DRAIN “
C
” and
pressing the START/PAUSE button again. In this case the water will be
emptied, but the laundry is not spun.
28
How to wash
PREWASH
WASH
RINSES
EXTRA
RINSE
SPIN
DRYING
OVER-
DOSAGE
END
132993360 gb.qxd 10/25/02 9:26 AM Pagina 28 (Nero/Process Black pellicola)