AEG L8FEC966CA страница 36 Скачать руководство пользователя

Страница: 36 / 60

11. DAILY USE

WARNING!

Refer to Safety chapters.

11.1 Activating the appliance

1. Connect the mains plug to the mains

socket.

2. Open the water tap.

3. Press the On/Off button for a few

seconds to activate the appliance.

A short tune sounds (if activated). The

programme dial is automatically set on

the default programme.
The display shows the programme

duration, the maximum load (for a few

seconds only), the default temperature,

the default spin speed and the indicators

of the phases making up the programme.

11.2 Loading the laundry

1. Open the appliance door.

2. Shake the items before you put them

in the appliance.

3. Put the laundry in the drum, one item

at a time.

Make sure not to put too much laundry in

the drum.

4. Close the door firmly.

CAUTION!

Make sure that no laundry

stays between the seal and

the door. There is a risk of

water leakage or damage to

the laundry.

CAUTION!

Washing heavily oiled,

greasy stains could cause

damage rubber parts of the

washing machine.

11.3 Using detergent and

other treatments

If both AutoDose tanks are enabled in

the set programme, detergent and fabric

softener are automatically loaded.
If one of the AutoDose tank or both

are disabled (OFF) in the set

programme, proceed by manually filling

the product in the proper compartment.

11.4 Setting a programme

If you wish to change the

automatic detergent or fabric

softener dosage, enter the

AutoDose configuration

mode before proceeding

with any programme setting.

The configuration mode may

cancel temporary settings.

Please refer to "AutoDose

configuration mode"

paragraph in "The AutoDose

Technology (Autodosing)"

chapter.

1. Turn the programme dial to select the

desired washing programme. The

related programme indicator comes

on.

The indicator of the Start/Pause button

flashes.

The display shows an indicative

programme duration, the maximum

declared load for the set programme

(only for a few seconds), the default

temperature, the default spin speed and

the washing phase indicators (when

available).

2. To change the temperature and/or

the spin speed, touch the related

buttons.

3. If desired, set one or more options by

touching the related buttons. The

related indicators come on in the

www.aeg.com

Содержание L8FEC966CA





























































Результаты поиска

Содержание L8FEC966CA

Отзывы:

Похожие инструкции для L8FEC966CA

Бренды по названию

Популярные бренды

AEG L8FEC966CA, Руководство пользователя

Результаты поиска

Содержание L8FEC966CA

Отзывы:

Похожие инструкции для L8FEC966CA

Бренды по названию

Популярные бренды