manualshive.com logo in svg

AEG L8FEC966CA, Руководство пользователя

Поделиться
Скачать
AEG L8FEC966CA Скачать руководство пользователя страница 15

5

Option - Skip‐

ping phase

touch button

By touching this button you can set:

• Rinse Only at first touch. The washing programme starts from

the rinsing phase by skipping the washing phase.

All set options (except permanent extra rinse)

are deselected automatically.

• Spin Only at second touch. The appliance skips washing and

rinsing phase.

• Drain Only. at third touch. The appliance performs the draining

phase only.

At firth touch, the appliance proposes the de‐

fault setting of the washing programme again.

6

Start/Pause

touch button

Touch this button to start, pause the appliance or interrupt a run‐

ning programme.

7

Time Save

touch button

With this option you can decrease the programme duration:

• If your laundry is normally or lightly soiled, it may be advisable

to shorten the washing programme. Touch this button once to

decrease the duration.

• In case of smaller load, touch this button twice to set an extra

quick programme.

The display shows the indicator 

.

This option can also be used to shorten the

Steam programme duration.

ENGLISH

15

Содержание L8FEC966CA





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды