AEG L7FE7261BI Скачать руководство пользователя страница 33

Страница: 33 / 48

The option indicator Rinse Hold

disappears.

If you have set Quiet

and

the spin speed is not

changed, when you press

the Start/Pause button, the

appliance only drains the

water.

When the programme is completed
and the door locked indicator

goes off, you can open the door.

Press the On/Off button for a few

seconds to deactivate the appliance.

11.14

Stand-by function

The Stand-by function automatically

deactivates the appliance to reduce the

energy consumption when:
• You do not use the appliance for 5

minutes when no programme is

running.

Press the button On/Off to activate

the appliance again.

• 5 minutes after the end of the

washing programme.

Press the On/Off button to activate

the appliance again.

The display shows the end of the last

programme.

Turn the programme dial to set a new

cycle.

If the dial is rotated to the "Reset"
position , the appliance automatically

turns off in 30 seconds.

If you set a programme or an

option that ends with water

in the drum, the Stand-by

function

doesn't deactivate

the appliance to remind you

to drain the water.

12.

HINTS AND TIPS

WARNING!

Refer to Safety chapters.

12.1

The laundry load

• Divide the laundry into: white,

coloured, synthetics, delicates and

wool.

• Follow the washing instructions on the

laundry care labels.

• Do not wash white and coloured

items together.

• Some coloured items can discolour

with the first wash. We recommend

that you wash them separately for the

first couple of times.

• Turn multilayered fabrics, wool and

items with printed illustrations inside

out.

• Pre-treat tough stains.

• Wash stubborn stains with a special

detergent.

• Be careful with curtains. Remove the

hooks and put the curtains in a

washing bag or pillowcase.

• Do not wash laundry without hems or

with cuts. Use a washing bag to wash

small and/or delicate items (e.g.

underwired bras, belts, tights,

shoelaces, ribbons, etc. ).

• A very small load can cause balance

problems with the spin phase leading

to excessive vibration. If this occurs:

interrupt the programme and

open the door (refer to "Daily

Use" chapter);

manually redistribute the load so

that the items are spaced evenly

around the tub;

press the Start/Pause button. The

spin phase continues.

• Button up pillowcases, close zippers,

hooks and poppers. Tie up belts,

cords, shoelaces, ribbons and any

other loose elements.

• Empty pockets and unfold the items.

ENGLISH

Содержание L7FE7261BI

















































Результаты поиска

Содержание L7FE7261BI

Отзывы:

Бренды по названию

Популярные бренды

AEG L7FE7261BI, Руководство пользователя

Результаты поиска

Содержание L7FE7261BI

Отзывы:

Бренды по названию

Популярные бренды