AEG L61270BI, Руководство пользователя

Страница: 8 / 64

Duration of the set programme
When you set a programme, the display shows the duration in hours and
minutes (for example
).
The duration is calculated automatically on the maximum load for each
type of fabric.
After the programme has started, the time remaining is updated every mi-
nute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed,
for example
(see chapter «Troubleshooting»).
End of programme
When the programme has finished, the display shows a blinking zero .
The Puerta/Porta indicator
B , the Lava. indicator A and the indicator of Ini-
cio/Pausa button go out. The door can be opened.
Incorrect option selection
If you set an option which is not compatible with the wash programme, the
display shows the message
Err for some seconds.
The yellow indicator of Inicio/Pausa button starts blinking.
Delay Start
When you press the relevant button to set the delay (20 hours max), it ap-
pears for some seconds, then the display shows the duration of the set
programme.
The delay time value decreases by one unit every hour. When only 1 hour
remains, the time decreases every minute.
Delay Start symbol
This symbol comes on when you set the delay time.
Child safety lock
This symbol comes on when you activate the child lock function.
4.3 Phase indicators
A
B
C
After you have pressed the Inicio/Pausa
button, the Lava. indicator comes on.
The appliance is operating.
The Puerta/Porta indicator indicates
when the door can be opened:
• indicator on: the door cannot be
opened.
• indicator blinking: the door is opening
in some minutes.
• indicator off: the door can be opened.
When the appliance performs additional
rinses, the Aclarado/Enxag. Extra
indicator comes on.
www.aeg.com 8