AEG L 99699 HWD, Руководство пользователя

Страница: 44 / 48

To a sink spigot
• Refer to the illustration. Put the drain hose
in the spigot and tighten it with a clip.
• Make sure that the drain hose makes a
loop to prevent that remaining particles
go in the appliance from the sink.
To a wall-pipe
• Directly to a built-in drain pipe in the room
wall and tighten it with a clip.
You can extend the drain hose to maximum 400 cm. Contact the service
centre for the other drain hose and the extension.
18.
TECHNICAL DATA
Dimension Width/ Height/ Depth/ Total depth 600 mm/ 870 mm/
605 mm/ 640 mm
Electrical connection Voltage
Overall power
Frequency 220-240 V
2200 W
50 Hz
Level of protection against ingress of solid particles and moisture
ensured by the protective cover, except where the low voltage
equipment has no protection against moisture IPX4
Water supply
1)
Cold water
Water supply pressure Minimum
Maximum 0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Ambient temperature Minimum 5 °C
Maximum 35 °C
Maximum wash load Cotton 9
Synthetics 4
Wool 1.5
Maximum dry load Cotton 6
Synthetics 4
Wool 1
www.aeg.com 44