9.
BEFORE FIRST USE
1.
Connect the mains plug to the mains
socket.
2.
Open the water tap.
3.
Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
4.
Put a small quantity of detergent in
the compartment for washing phase.
5.
Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
10.
DAILY USE
10.1
Activating the appliance
1.
Connect the mains plug to the mains
socket.
2.
Open the water tap.
3.
Press button Aan/Uit - Marche/Arrêt
to activate the appliance.
A short tune sounds.
10.2
Loading the laundry
1.
Open the appliance door.
2.
Put the laundry in the drum, one item
at a time.
3.
Shake the items before you put them
in the appliance.
Make sure you do not put too much
laundry in the drum.
4.
Close the door firmly.
CAUTION!
Make sure that no laundry
becomes trapped between
the seal and the door. There
is a risk of water leakage or
damage to the laundry.
10.3
Filling the detergent and
additives
Compartment for prewash phase,
soak programme or stain remover.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Flap for powder or liquid detergent.
Always follow the
instructions that you find on
the packaging of the
detergent products.
10.4
Check the position of the
flap
1.
Pull out the detergent dispenser until
it stops.
2.
Press the lever down to remove the
dispenser.
www.aeg.com
16
