background image

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

300 mm

1

2

1

Induction cooking surface

2

Control panel

4.2 Control panel layout

1

3

4

2

5

6

9

8

7

1

 To activate and deactivate the

hob.

2

 To activate and deactivate Lock or

Child Safety Device.

3

 CountUp Timer indicator.

4

 Count Down Timer indicator.

5

Timer display: 00 - 99 minutes.

6

 To select Timer functions.

7

 /   To increase and decrease

the time.

8

 To activate PowerBoost.

9

To set a heat setting: 0 - 9.

4.3 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ /  There is a risk of

burns from residual heat.

The indicators show the level of the

residual heat for the cooking zones you

are currently using. When the hob is

deactivated, the indicators are still

visible. When the hob is cold enough,

they disappear. The indicators may also

come on for the neighbouring cooking

zones even if you are not using them.

The induction cooking zones produce the

heat necessary for the cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat

of the cookware.

4.4 Accessories

The WOK pan P 6.0 (supplied)

Only use the supplied WOK

pan.

390 mm, 6 litres, 1 handle, stainless

steel.

www.aeg.com

10

Содержание IWE41600KB





















Отзывы: