background image

from the power supply. This to prevent an

electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it may

splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases can

cause spontaneous combustion.

• Used oil, that can contain food remnants,

can cause fire at a lower temperature than

oil used for the first time.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the control

panel.

• Do not put a hot pan cover on the glass

surface of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or cookware

fall on the appliance. The surface can be

damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron, aluminium or

with a damaged bottom can cause

scratches on the glass / glass ceramic.

Always lift these objects up when you

have to move them on the cooking

surface.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

2.4 Care and cleaning

• Clean the appliance regularly to prevent

the deterioration of the surface material.

• Switch off the appliance and let it cool

down before cleaning.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Use only neutral detergents. Do not

use abrasive products, abrasive cleaning

pads, solvents or metal objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use original

spare parts only.

• Concerning the lamp(s) inside this product

and spare part lamps sold separately:

These lamps are intended to withstand

extreme physical conditions in household

appliances, such as temperature,

vibration, humidity, or are intended to

signal information about the operational

status of the appliance. They are not

intended to be used in other applications

and are not suitable for household room

illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to dispose of the

appliance.

• Disconnect the appliance from the mains

supply.

• Cut off the mains electrical cable close to

the appliance and dispose of it.

6

ENGLISH

Содержание IKE74471XB

























Отзывы: