AEG IDK84454IB, Инструкция по монтажу и эксплуатации

Страница: 53 / 60

52
Warming Function
The Warming Function is a control function that allows you to keep
the heat at a constant temperature at an optimized power level;
this feature is ideal for keeping ready meals warm.
The Warming Function can be enabled by tapping the activation
zone
(4)
On the display of the zone active in Warming Function mode will
appear the symbol
“ ”
Key Lock
The Key Lock allows you to lock the settings of the hob to prevent
accidental tampering with the same, while leaving the set functions
enabled.
Activation:
• push (9)
• the LED over the button will turn on, to indicate that it has been
activated
Repeat the operation to deactivate .
Child Lock
The Child Lock makes it possible to prevent children from
accidentally accessing the cooking zone and extraction zone,
preventing the activation of any functions.
The Child Lock can only be activated when the product is on, but
with the cooking zones (and extraction zone) off.
Activation:
• remove any pots from the hob
• push and hold both (9) and the (10), an acoustic
signal indicates that the function is active, and a " " will appear on
the display
(13) and (14) .
Repeat the operation to deactivate .
Timer
The Timer function is a countdown, which can be set for each
cooking zone (and suction zone), even simultaneously.
At the end of the set period, the cooking zones (or extraction zone)
will automatically shut down and the user will be informed by way
of an acoustic signal.
Activation/Regulation of hob Timer function
• Select the cooking zone (power ¹ 0)
• Press (8) simultaneously to access the Timer
function
• Set the duration of the Timer:
press the selector
, to increase the automatic shut-down time
press the selector , to decrease the automatic shut-down time
If desired, repeat the operation for the other cooking zones.
Note: Each cooking zone can have a different Timer set; on the
display, (15) , the countdown of the last selected hob will be shown
for 10 seconds, after which the countdown with the least remaining
time will be shown.
When the timer has finished the count, it emits a beep (for 2
minutes; you can mute it by tapping
simultaneously ) ,
while the display (15) is flashing, showing the symbol “ . ".
Note: the symbol “ “ (19) appears beside the display of the
cooking zone when the timer is active.
To switch-off the Timer:
• select the cooking zone
• set the value of the timer to " " , via
Note: the function remains active if no other key is pressed in the
meantime.
Egg Timer
The Egg Timer function is a countdown independent of the
cooking zones (and the extraction zone). The Egg Timer can be
enabled by pushing
(8) simultaneously.
Note : to set the Egg Timer function, follow the same steps as that
applicable to the Timer
When the timer has finished the count, it emits a beep (for 2
minutes; you can mute it by tapping
simultaneously ) ,
while the display (15) is flashing, showing the symbol “ . ".
Note: with the Egg Timer active, appears the symbol (20)
Pause
The Pause function allows to suspend any function active on the
hob, bringing the cooking power to zero.
Activation:
• push (10)
• on display will appear a " " (13) .
To deactivate the function:
Note : this operation restores the hob conditions prior to the pause.
• push (10)
• within 10 seconds slide your fingers to the right along
the
Selection zone (3), corresponding to the desired cooking
zonem (FIG.19) ;
Note : if the operation is not performed during this time
the pause function will remain active.
Note: if after 10 minutes , the Pause Function is not deactivated,
the hob switches off automatically.
Recall
The Recall function allows to recover all the hob settings, in case
of accidental shut-down.
Activation:
• switch the cooktop on again within 6 seconds after shut-
down
• push within the next 6 seconds
Automatic Heat UP
The Automatic Heat UP function allows you to bring the set power
up to speed; with this function, we have the advantage of having a
faster cooking, but without the risk of burning the food, because the
temperature does not exceed that of the set level.
This function is available for power levels 1-8 .
Activation:
• push and hold the Selection zone (3) , the desired power
• on display appears a " " (13) .