background image

only, it is possible to deactivate the

notification for refilling rinse aid.

However, for best drying performance,

always use rinse aid.
If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse

aid empty notification

The appliance must be in programme

selection mode.

1.

To enter the user mode, press and
hold simultaneously 

 and 

 until

the indicators 

 and

 start flashing and the display is

blank.

2.

Press 

.

• The indicators 

 and 

are off.

• The indicator 

 still flashes.

• The display shows the current

setting: 

 = the rinse aid empty

notification is activated (factory

setting).

3.

Press 

 to change the setting.

 = the rinse aid empty notification is

deactivated.

4.

Press on/off to confirm the setting.

6.5 

Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.
There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic

signal is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

The appliance must be in programme

selection mode.

1.

To enter the user mode press and
hold simultaneously 

 and 

 until

the indicators 

 and

 flash and the display is blank.

2.

Press 

• The indicators 

 and

 are off.

• The indicator 

 still flashes.

• The display shows the current

setting: 

 = Acoustic signal off.

3.

Press 

 to change the setting.

 = Acoustic signal on.

4.

Press on/off to confirm the setting.

6.6 

AirDry

AirDry improves the drying results with

less energy consumption.

While the drying phase

operates, a device opens the

appliance door. The door is

then kept ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

open. This can cause

damage to the appliance.

CAUTION!

In case of presence of

children, the AirDry system

can be deactivated if you

want to keep the door

closed in the end of the

cycle.

ENGLISH

11

Содержание FSS62700P

























Отзывы: