AEG FAVORIT F89088VI-S, Инструкция по использованию и уходу, Страница: 17 / 45

EN
Rev. 0.0 17
USER INSTRUCTIONS
5.1.1 Adding the rinse-aid
The rinse aid helps the dishes dry faster and prevents the formation of scale deposits
and staining; it is automatically added to the water during the final rinse cycle, from
the container situated on the inner side of the door.
A
C
B
Fig. 4-04
To add rinse aid:
• Open the door.
• Rotate the container cover (ref. A fig. 4-04) anticlockwise by ¼ of a turn and re-
move it.
• Add the rinse aid until the container is full (approximately 140 ml). The optical
level indicator (ref. B fig. 4-04), on the side of the cap should be completely ob-
scured. Refill the rinse aid when the optical level indicator becomes clear again,
or when the rinse aid warning light illuminates (see “Description of controls”
manual).
• Replace the cover (ref. A “ g. 4-04) by turning it in a clockwise direction until it is
fully closed.
• Use a cloth to remove any spillage of rinse aid which might lead to the formation
of excess foam.
5.1.2 Adjusting the rinse-aid dispenser setting
The rinse-aid dispenser can be set to one of 6 different levels. The dishwasher is
factory set for medium water hardness (selector set to “3”). To change the setting,
turn the dispenser selector (ref. c fig. 4-04) to the desired position: the amount of
rinse-aid dispensed is proportional to the position of this selector. Make sure that
the minimum amount of rinse-aid (selector turned to “1”) is approximately 1 ml and
the maximum amount (selector turned to “6”) is approximately 6 ml.