26
Using 3in1 detergents
These products are detergents with a combined cleaning, rinsing and
salt function.
When the 3in1 function is activated,
–
the addition of special salt and rinse aid from the respective dispenser
is prevented.
–
If the salt and rinse aid dispensers are empty, this is not indicated.
3
If you want to use 3in1 detergents, check whether these detergents are
suitable for your water hardness. (Follow the manufacturer’s instruc-
tions.)
If you want to use 3in1 products
1.
Press the ON/OFF button.
2.
Go to the 3 IN 1 option.
3.
Set the value to ON (see section “Adjusting an option/setting”
sym-
bol lights up in the symbol line.
Before the start of the dishwashing cycle put 3in1 detergent in the de-
tergent dispenser.
3
As the rinse aid inflow is automatically switched off when the 3in1
function is activated, it may come about because of the different qual-
ity standards in the 3in1 detergent, that the dishes do not dry suffi-
ciently.
If this happens, proceed as follows (see section “Adding rinse aid”):
•
Fill up the dispenser (if this is empty) with rinse aid.
•
Set rinse aid dosage to “2” mechanically.
•
Activate rinse aid inflow.
If you do not want to use 3in1 products any more
If you want to stop using 3in1 products, please do the following:
•
Deactivate the 3in1 function.
•
Fill up the dispensers for salt and rinse aid again.
•
Switch the water softener to the highest setting and perform up to
three normal cycles without loading any dishes.
•
Then set the water softener to the water hardness in your area.