AEG FAVORIT 88009 M0P/AU Скачать руководство пользователя страница 4

• If the water inlet hose is damaged, im-

mediately disconnect the mains plug
from the mains socket. Contact the
Service to replace the water inlet hose.

1.3 

Use

• This appliance is intended to be used

in household and similar applications
such as:
– Farm houses.
– By clients in hotels, motels and oth-

er residential type environments.

– Bed and breakfast type environ-

ments.

WARNING!

Risk of injury, burns, electrical
shock or fire.

• Do not change the specification of this

appliance.

• Put knives and cutlery with sharp

points in the cutlery basket with the
points down or in a horizontal posi-
tion.

• The appliance can release hot steam if

you open the door while a program
operates.

• Do not keep the appliance door open

without supervision to prevent to fall
on it.

• Do not sit or stand on the open door.
• Obey the safety instructions from the

manufacturer of the dishwasher deter-

gent to prevent burns to eyes, mouth
and throat.

• Only put detergent in the dispenser

before you start a program.

• Check that the detergent dispenser is

empty after completion of the pro-
gram.

• Do not drink and play with the water in

the appliance.

• Do not remove the dishes from the

appliance until the program is com-
pleted. There can be detergent on the
dishes.

• Make sure the dispenser is empty after

the completion of the program.

• Do not put flammable products or

items that are wet with flammable
products in, near or on the appliance.

• Do not use water spray and steam to

clean the appliance.

1.4 

Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.
• Remove the door catch to prevent

children and pets to get closed in the
appliance.

4

www.aeg.com

Содержание FAVORIT 88009 M0P/AU

























Отзывы: