AEG FAVORIT 88009 M0P/AU Скачать руководство пользователя страница 3

1. 

  SAFETY INSTRUCTIONS

Before the installation and use of the ap-
pliance, carefully read the supplied in-
structions. The manufacturer is not re-
sponsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.

1.1 

Children and vulnerable

people safety

WARNING!

Risk of suffocation, injury or per-
manent disability.

• Do not let persons, children included,

with reduced physical sensory, re-
duced mental functions or lack of ex-
perience and knowledge use the ap-
pliance. They must have supervision or
instruction for the operation of the ap-
pliance by a person who is responsible
for their safety.

• Do not let children play with the appli-

ance.

• Keep all packaging away from chil-

dren.

• Keep all detergents away from chil-

dren.

• Keep children and pets away from the

appliance door when it is open.

1.2 

Installation

• Remove all the packaging.
• Do not install or use a damaged appli-

ance.

• Do not install or use the appliance

where the temperature is less than 0
°C.

• Do not drill into the sides of the appli-

ance otherwise damage to hydraulic
and electrical components may occur.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• The appliance must be earthed.
• Make sure that the electrical informa-

tion on the rating plate agrees with

the power supply. If not, contact an
electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.
Should the mains cable need to be re-
placed, this must be carried out by our
Service centre.

• Connect the mains plug to the mains

socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the
mains plug.

• Do not touch the mains cable or the

mains plug with wet hands.

• Test the appliance. Run a quick wash-

ing program and ensure that the ap-
pliance fills with water, washes and
drains with no leaks.

Water connection

• Make sure not to cause damage to the

water hoses.

• Before you connect the appliance to

new pipes or pipes not used for a long
time, let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

• The water inlet hose has a safety valve

and a sheath with an inner mains ca-
ble.

WARNING!

Dangerous voltage.

ENGLISH

3

Содержание FAVORIT 88009 M0P/AU

























Отзывы: