AEG FAVORIT 86470 I, Информация пользователя, Страница: 24 / 36

Operating instructions
24
Malfunction
The programme is not
starting.
Rust spots are visible in
washing compartment.
Rust spots in the washing
compartment are from
particles from outside the
appliance (rust particles
from the water pipe, from
pans, cutlery, etc). Remove
such spots with a
commercially available
stainless steel cleaner. Only wash cutlery and dishes
that are suitable for dish-
washer use.
Close the lid of the special
salt container securely.
If dishes are to be washed
immediately cancel delay
start timer. In the case of dishwasher
models with start delay
timer:
A start delay is selected.
Mains plug is not plugged in.
House fuse in defective.
The whistling is not a cause
for concern. There is a whistling
noise during washing. Use a different brand of
detergent.
Insert mains plug.
The door of the dishwasher
is not closed properly. The DOOR (TÜR)
indicator is lit.
Shut the door.
Replace fuse.
Possible cause Remedy
Fault code
is
displayed in the multi-
display.
The indicator for the
selected programme is
flashing; fault code
is displayed in the
multi-display. (Problems
with water outflow)
The water drain hose
has not been correctly
laid.
Check hose installation.
The leak prevention system
has been triggered.
Turn off the tap and contact
customer service.
The SIEB control
indicator is lit.
The indicator SIEB is only
intended to remind you to
occasionally check the
dishwasher’s filter and to
clean it out when necessary.
It becomes illuminated at
regular intervals, regardless
of the state of cleanliness of
the filter.
Turn off the tap and contact
your local Service Force
Centre.
The siphon is blocked. Clean out siphon.
152971 38/0en 1-12-2003 11:39 Pagina 24