AEG FAVORIT 86470 I, Информация пользователя, Страница: 20 / 36

Operating instructions
20
Setting or changing the Start Delay
With the delay timer you can delay the start of a programme for
between 1 and 19 hours.
Setting the start delay:
1. Press the Delay Timer button repeatedly until the multi-display
shows the desired time delay, for example, 12h, if the programme is
to start in 12 hours. The Delay Timer indicator is illuminated.
2. Select programme.
3. The time remaining to the start of the programme is continuously
displayed (e. g. 12h, 11h, 10h, ... 1h etc.).
To change the start delay:
As long as the programme has not yet started, you can still change
the start delay by pressing the Delay Timer button.
Cancelling the time delay:
Press the Delay Timer button repeatedly until the length of the
selected programme appears in the multi-display.
The selected programme will begin immediately.
To change a programme after the start delay has been set:
As long as the programme has not yet started, you can still change
the programme. First cancel the programme, then re-set the time
delay, finally select the new programme.
Switching off the dishwasher
Only switch the dishwasher off when the multi-display indicates “0”
for the remaining programme time and the END indicator is
illuminated.
With some programmes, the drying fan continues to run even
after the end of the programme.
1. Press the ON/OFF button. All display indicators will go out.
2. Turn off the tap.
Carefully open the door. Hot steam may escape.
Hot dishes are sensitive to knocks. Therefore leave the dishes to cool
for about 15 minutes before removing them. You also get a better
drying result.
152971 38/0en 1-12-2003 11:39 Pagina 20