Connecting the dishwasher
34
1
WARNING! Dangerous voltage
(This does apply to dishwashers with safety
valve).
The electrical cable for the safety valve is in
the doublewalled water inlet hose and is
live.
Therefore do not immerse the water inlet
hose or the safety valve in water.
Water drainage
Drain hose
1
The drain hose must not be kinked, crushed or entangled.
Connecting the drain hose:
–
Maximum permitted height: 1 metre.
–
Minimum required height: 40 cm above the bottom edge of the appliance.
Extension hoses
•
Extension hoses are available from your lo
cal Service Force Centre. To ensure that the
function of the appliance is not impeded,
the internal diameter of extension hoses
must be 19 mm.
•
Extension hoses must not be laid more
than a maximum distance of 4 metres
horizontally; the maximum permitted
height for the connection for the drain
hose is then 85 cm.
Sink outlet connection
•
The outlet of the drain hose (ø 19 mm) fits all commonly available sink outlet types.
The outer diameter of the sink outlet connection must be at least 15 mm.
•
The drain hose must be fixed to the sink outlet connection using the hose clamp sup
plied.
Antiflood system
For protection from water damage, the dishwasher is equipped with a antiflood sys
tem.
In the event of a fault, the safety valve in the water inlet hose immediately interrupts
the supply of water to the appliance.