AEG FAVORIT 65060 IL Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 48

AEG FAVORIT 65060 IL Скачать руководство пользователя страница 34

Operating instructions

34

What to do, when...

Certain problems are due to the lack of simple maintenance or
oversights, which can be solved with the help of the instructions given
here, without calling out an engineer.

...a flashing fault code appears

The intervention of an alarm is indicated by:
- indicator light of the programme in progress is flashing
- a fault code visible in the digital display.
Open the door and carry out the following suggested corrective
actions (see following chart).

Fault code / Malfunction

- Indicator light of the

programme in progress
is flashing

- in the digital display

appears

The machine does not fill
with water

The water tap is blocked or
furred with limescale.

The water tap is turned off.

The filter (where present) in
the threaded hose fitting at
the water inlet valve is
blocked.

Clean out the siphon.

The siphon is blocked.

Check the water drain
hose connection.

Clean the water tap.

Turn the water tap on.

Clean the filter in the
threaded hose fitting.

The water inlet hose has not
been correctly laid or it is
bent or squashed.

Check the water inlet hose
connection.

The water drain hose has not
been correctly laid or it is
bent or squashed.

Possible cause

Solutions

- Indicator light of the

programme in progress
is flashing

- in the digital display

appears

The dishwasher will not
drain

Close the water tap and
contact the Service Force
Centre.

Protection against flooding is
active.

- Indicator light of the

programme in progress
is flashing

- in the digital display

appears

Once the checks have been carried out, to continue the programme,
close the door and press the push button of the programme that was
running before the intervention of the alarm. The programme will
continue from the point in which it was interrupted. If the fault code
reappears contact your local Service Force Centre.
For other fault codes not described in the above chart will appear,
please contact your Service Force Centre.

152964 48/0en 27-02-2004 9:04 Pagina 34

«
...
32
33
34
35
36
...
»

Содержание FAVORIT 65060 IL

















































Отзывы:

Нет отзывов