AEG FAVORIT 65060 IL Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 48

AEG FAVORIT 65060 IL Скачать руководство пользователя страница 32

Operating instructions

32

4.

Take hold of the coarse/fine filter (

A/B

) by the handle with the hole

and remove from the microfilter (

C

).

5.

Clean all filters thoroughly under running water.

6.

Remove the flat filter (

D

) from the base of the washing

compartment and clean both faces thoroughly.

7.

Put the flat filter (

D

) back in the base of the washing compartment.

8.

Place the coarse/fine filter (

A/B

) in the microfilter (

C

) and press

together.

9.

Put the filter combination in place and lock by turning the handle
clockwise to the stop. During this process ensure that the flat filter
does not protrude above the base of the washing compartment.

Under no circumstances may the dishwasher be used without
filters.
Incorrect repositioning and fitting of the filters will produce poor
washing results.

NEVER try to remove the upper
spray arm.

If residues of soil have clogged the
holes in the upper spray arm,
remove them with a toothpick.

MA40

MA31

152964 48/0en 27-02-2004 9:04 Pagina 32

«
...
30
31
32
33
34
...
»

Содержание FAVORIT 65060 IL

















































Отзывы:

Нет отзывов