AEG FAVORIT 60850 ViM Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 52

AEG FAVORIT 60850 ViM Скачать руководство пользователя страница 35

35

Malfunction

Possible cause

Remedy

The cycle indicator for the
selected dishwashing cycle
is flashing:
the control indicator

is lit,
fault code

Å 10

is dis-

played in the multi-display
(Problems with water in-
let).

Water tap is blocked with
limescale or faulty.

Check the water tap and
have it repaired if necessary.

The tap is turned off.

Turn the tap on.

The filter (where present) in
the threaded hose fitting
on the tap is blocked.

Clean the filter in the
threaded hose fitting.

Filters in the base of the
washing compartment are
blocked.

Cancel the dishwashing cy-
cle (see chapter: Starting a
dishwashing cycle),
clean filters (see chapter:
Cleaning the filters),
then start the dishwashing
cycle again.

Water inflow hose
has not been correctly posi-
tioned.

Check the position of the
hose.

The cycle indicator for the
selected dishwashing cycle
is flashing,
fault code

Å 20

is dis-

played in the multi-display
(there is water in the dish-
washer’s internal dispens-
er).

The sink outlet is blocked.

Clean out sink outlet.

Water drain hose
has not been correctly posi-
tioned.

Check the position of the
hose.

Fault code

Å 30

is dis-

played in the multi-dis-
play.

The anti-flood system has
been triggered.

First shut off the water tap,
then switch off the appli-
ance and contact the Cus-
tomer Care Department.

The control indicator

is

lit.

The door of the dishwasher
is open.

Close the dishwasher door.

The control indicator

is

lit.

The indicator

is there to

remind you to check the
dishwasher’s filters occa-
sionally and to clean them,
if necessary. It lights up at
regular intervals, regardless
of how clean the filters are.

The indicator goes out auto-
matically at the start of the
next dishwashing cycle.

«
...
33
34
35
36
37
...
»

Содержание FAVORIT 60850 ViM





















































Отзывы:

Нет отзывов