AEG FAVORIT 55210, Руководство пользователя

Страница: 20 / 52

The cleaning results are not satisfactory
The dishes are not clean • The selected washing programme is not applicable for the type of
load and soil.
• The basket is loaded incorrectly so that water cannot reach all
surfaces.
• Spray arm does not turn freely because of incorrect arrangement
of the load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.
Limescales particles on the
dishes
• The salt container is empty.
• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.
The dishes are wet and dull • No rinse aid has been used.
• The rinse aid dispenser is empty.
There are streaks, milky spots
or a bluish coating on
glasses and dishes
• Decrease the rinse aid dosage.
Dry water drop signs on
glasses and dishes
• Increase rinse aid dosage.
• The detergent can be the cause.
TECHNICAL DATA
Dimensions Width cm 54,5
Height cm 44,7
Depth cm 48,0
Electrical connection - Voltage
- Overall power - Fuse
Information on the electrical connection is given on the rating
plate on the back of appliance.
Water supply pressure Minimum 0,8 bar (0,08 MPa)
Maximum 10 bar (1,0 MPa)
Capacity Place settings 6
INSTALLATION
WARNING!
Make sure that mains plug is disconnected from the mains socket during installation.
Fitting the appliance
Put the appliance adjacent to a water tap and a drain.
When you put the appliance in place, make sure that the water hoses are not kinked or
squashed.
Install the appliance on a kitchen sink, worktop or built-in..
20 Technical data