AEG FAVORIT 55000 VI, Руководство пользователя, Страница: 21 / 68

Problem Possible cause Possible solution
There are streaks, whitish
stains, or a bluish layer on
glasses and dishes.
The rinse aid quantity is too
high.
Decrease the rinse aid quantity.
Dry water drop stains on
glasses and dishes.
The rinse aid quantity is too
low.
Increase the rinse aid quantity.
The detergent can be the cause. Use a different brand of deter -
gent.
The dishes are wet. The washing programme was
without a drying phase or
with a decreased drying phase.
For better drying results, keep
the door ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is emp -
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is on
(this function automatically
deactivates the rinse aid dis -
penser).
Activate the rinse aid dispenser.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons (B) and (C) at the same time until the indicators of
function buttons (A), (B) and (C) flash.
4. Release function buttons (B) and (C).
5. Press function button (B).
• The indicators of function buttons (A) and (C) go off
• The indicator of function button (B) continues to flash
• The display shows the setting of the rinse aid dispenser.
Rinse aid dispenser is off.
Rinse aid dispenser is on.
6. Press function button (B) to change the setting.
7. Deactivate the appliance to confirm.
TECHNICAL DATA
Dimensions Width 596 mm
Height 818 - 898 mm
Depth 550 mm
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Technical data 21